This is a computer translation of the original content. I have been given the task of installing a configuring this main board. Worked perfect for what I needed it for – a quick fix on an old machine. I will post more if needed, install went great. The floppy drive light stayed on after I hit the F6 key.
|Date Added:||12 June 2013|
|File Size:||69.94 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
You need to know how many raid array you want to have.
D975zbx2 something else to think about. Socket 7 Computer Motherboard for Intel. You may also like. Thanks Aryan, That solved my problem and by going to the link you provided i was able to learn more about RAID configuration. Secondly whether an array, eg RAID 5 can be spread over the two controllers? If your motherboard chipset does not provide RAID function but your motherboard has an raif chip that does, you will need to install your hard disk drives to the ports attached to this chip instead of using the hard disk drive ports attached to the south bridge chip.
Downloads for Intel® Desktop Board D975XBX2
Get a replacement Motherboard under Warranty. Jun 10, Messages: Locate your Sata Drive. Discussion in ‘ Hardware ‘ started by renlimwJun 10, SATA – connector imtel Usually this extra chip has an embedded RAID controller.
I checked the floppy disk on another computer and worked great, I used a known good floppy drive with d795xbx2 same results, I used another known good floppy drive cable. At boot up the Marvell config always comes up first, does this mean that mainboard will always look to see if there is anything attached to the Marvell connectors to boot from first, then if none it looks to the ICH7DH?
Please remember to be considerate of other members. Don’t configure it to boot from this Sata drive. Tech Support Guy is completely free — paid for by advertisers and donations.
Take this hardisk out and install it in some other system. Yes, my password is: Does this mean we can use the red iintel, which is for external SATA attachment, which is in the same group as the blue Marvell d975bxx2, for attach attaching a internal SATA HDD would the Marvell controller see this as a 4th drive, that can be configured into a array along with those attached to the blue connectors?.
Enabling RAID in the BIOS for Intel® Desktop Boards
inteel If you’re not already familiar with forums, watch our Welcome Guide to get started. Socket P Computer Motherboard for Intel. I have made a few computers in my time but this MB is a real pain in the rump! Worked perfect for what I needed it for – a quick fix on an old machine.
Intel DXBX2 desktop board drive problems – TechRepublic
In situations like the one shown in Figure 3 — two RAID-enabled chips on the motherboard — the hard disk drives must be installed on the same port group. The floppies do contain the files needed; I checked them on a second computer.
Any Condition Any Condition. Also please exercise your best judgment when posting in the forums–revealing personal information such as your e-mail address, telephone number, and address is not recommended.